Sistem Pembatas Pembelian BBM Menggunakan RFID (Radio Frequency Identification) dan Arduino Uno
DOI:
https://doi.org/10.59945/jpnm.v2i1.148Keywords:
Arduino Uno, Fuel Oil, RFID, Flow Meter SensorAbstract
The dwindling availability of fuel (fuel oil) in Indonesia, Pertamina is conducting a trial run on limiting purchases of fuel. Payment transactions using a card with RFID (Radio Frequency Identification) technology are one type of non-cash transaction that can be used as an alternative payment method. In this study, we will discuss the use of RFID tags to complete purchases on BBM with a predetermined number of calculations. This tool uses Arduino Uno as its microcontroller to process data received from RFID tags and RFID readers to read the value of the fuel purchase balance, which then the buyer writes down the nominal purchase using the programmed 4x4 keypad by limiting purchases to no more than a predetermined nominal in one day. This tool uses the YF-S401 flow meter sensor to determine the volume of fuel flowing in accordance with the nominal previously inputted, the data will be displayed via a 16x2 LCD in real time using the RTC DS1307 to store month, date and time data stored in the module SD card with all data obtained in measurements.
References
D. Nataliana, F. Hadiatna, and A. Fauzi, (2019) “Rancang Bangun Sistem Keamanan RFID Tag
menggunakan Metode Caesar Cipher pada Sistem Pembayaran Elektronik,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 7, no. 3, p. 427, doi: 10.26760/elkomika.v7i3.427.
T. Husain, (2020) “Analisis Keberhasilan Penerapan Sistem RFID Terintegrasi (Studi tentang End-User’s
Kartu e-Toll di Tol JORR 2),” Jusim (Jurnal Sist. Inf. Musirawas), vol. 5, no. 2, pp. 124–133.
Y. F. Alfian, M. Mukhsin, and A. Qustoniah, (2018) “Prototype Sistem Pembelian Bahan Bakar Minyak Menggunakan Rfid,” Widya Tek., vol. 26, no. 2, pp. 247–259, doi: 10.31328/jwt.v26i2.799.
Kompas.com, (2022) “Prototype Sistem Pembelian Bahan Bakar Minyak Menggunakan RFID,” Kompas, Sep. 16, 2022.
A. Wahyudi, F. N. Fajri, and Syaiful, (2020) “Pemanfaatan Radio Frequency Identification (RFID) Berbasis Internet of Things (IoT) untuk Perancangan Palang Pintu Otomatis di Universitas Nurul Jadid,” J. GUYUB Community Manag., vol. 1, no. 2, pp. 117–130, 2020, doi: http://dx.doi.org/10.33650/guyub.v1i2.1418.
H. P. Barus, A. Asran, and A. Bintoro, (2021) “Sistem Antisipasi Air Pasang Dan Air Surut Pada Kolam Ikan Menggunakan Sensor Ultrasonic Berbasis Arduino Uno,” J. Energi Elektr., vol. 10, no. 2, p. 10, doi: 10.29103/jee.v10i2.1908.
E. Pebrina and S. Rodin, , (2022) “Sistem Penjualan Gas LPG 3Kg Berbasis RFID dengan Memanfaatkan E- KTP,” Diploma thesis, Politeknik Manufaktur Negeri Bangka Belitung.
O. Y. Barokah, , (2022) “Rancang Bangun Sistem Penakaran Debit Bahan Bakar Minyak Premium, Pertalite Dan Pertamax Turbo Dengan Menggunakan Arduino Uno,” Disertasi Doktor, Universitas Islam Riau.
M. A. Ardiansyah, (2022) “Alat Pijat Oksitosin Otomatis untuk Meningkatkan Produksi Asi pada Ibu
Menyusui,” Skripsi (S1) thesis, Universitas Muhammadiyah Ponorogo.
I. A. Nugraha, (2019) “Design Security Systems Of Cabinet Drawer Using Rfid And Password,” Diss.
Untag 1945 Surabaya.
Musfita, (2022) “Rancang Bangun Sistem Informasi Monitoring dan Kontroling Kualitas Air pada Akuarium Ikan Hias Air Tawar Menggunakan Internet of Things,” Skripsi thesis, Universitas Hasanuddin.
M. F. Said, Samratul, and Saputra, (2022) “Desain Dan Implementasi Sistem Monitoring Berbasis Data Logger Pada Panel Surya Di Pembangkit Listrik Tenaga Surya (PLTS) Desa Bungku,” S1 thesis, Universitas Jambi.
R. Nadeak, (2022) “Rancang Bangun Tabungan Uang Kertas dengan Autentikasi Sidik Jari Berbasis Internet of Things,” Diploma thesis, Universitas Nasional
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 JPNM Jurnal Pustaka Nusantara Multidisiplin
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
